Hydraulic Tube Puller (Click for more Info) TUBE PULLER CP-1000-S Shortened version of our model CP-1000. This unit has been designed to remove both ferrous and non-ferrous tubing from condensers, chillers and heat exchangers. Capacity from 5/8” to 1-1/2” O.D. gage 16 to 24 (16 to 38 mm O.D. wall 0,5 to 1,6 mm) from tube sheet up to 2” (50 mm) Specifications Pulling force 15 T (150 kN) Pulling Stroke 6 “ (160 mm) Pulling speed 0,7”/sec (17 mm/sec) Dimension 3,38” x 26,77” (86 x 680 mm) Weight 30 Lbs (13,5 kg) Parameters TUBE OD INCH TUBE OD MM TUBE GAUGE 5/8 15.8 16-17 // 18-19 // 20-21 // 22-23 3/4 19.0 16-17 // 18-19 // 20-21 // 22-23 7/8 22.2 16-17 // 18-19 // 20-21 // 22-23 1.0 25.4 16-17 // 18-19 // 20-21 // 22-23 1-1/4 31.7 16-17 // 18-19 // 20-21 // 22-23 1-1/2 38.1 16-17 // 18-19 // 20-21 // 22-23 TUBE PULLER CP-1000-CC This is our lightweight unit, specifically designed for the condenser and chiller markets. An ideal tool for working within the water box of a surface condenser or within the channel head of a chiller, you can remove 4-6 tubes a minute quickly and effortlessly. Capacity from 5/8” to 1” OD, gage 16 to 24 (16 to 25 mm OD, wall 0,5 to 1,6 mm) from tube sheet up to 2” (50 mm). Specifications Pulling force 15 T (150 kN) Pulling Stroke 6 “ (160 mm) Pulling speed 0,7”/sec (17 mm/sec) Dimension 3,38” x 26,77” (86 x 680 mm) Weight 26.4 Lbs (12 kg) Parameters TUBE OD INCH TUBE OD MM TUBE GAUGE 5/8 15.8 16-17 // 18-19 // 20-21 // 22-23 3/4 19.0 16-17 // 18-19 // 20-21 // 22-23 7/8 22.2 16-17 // 18-19 // 20-21 // 22-23 1.0 25.4 16-17 // 18-19 // 20-21 // 22-23 TUBE PULLER CPS-1000 Our short spear type puller has been designed to pull ferrous, nonferrous and alloy tubing & stubs from heat exchangers, chillers, condensers and similar thermal exchange equipment. Capacity from 1/2” to 1” O.D. of any gauge up to the units 15 Ton Capacity. (12 to 25 mm O.D. any wall thicknesses up to the units 15T Capacity) from tube sheet up to 2,25” (57 mm) Utilizing economical short spear technology, our patented extraction system, automatically grips and releases the spear at the end of its cycle. This system is simple and cost efficient to own & operate, due to the small amount of consumable required to extract a tube when compared to other pulling technologies. Specifications Pulling force 15 T (150 kN) Pulling Stroke 6 “ (160 mm) Pulling speed 0,7”/sec (17 mm/sec) Dimension 3,38” x 26,77” (86 x 680 mm) Weight 26.4 Lbs (12 kg) Parameters TUBE OD INCH TUBE OD MM TUBE GAUGE 5/8 15.8 10-11 // 12-13 // 14-15 // 16-17 3/4 19.0 10-11 // 12-13 // 14-15 // 16-17 7/8 22.2 10-11 // 12-13 // 14-15 // 16-17 1.0 25.4 10-11 // 12-13 // 14-15 // 16-17 TUBE PULLER CP-1000-FF This unit has all the features of our Standard Model CP-1000 with the additional advantage of being able to remove stubs from the water-box of Fin Fan Coolers as well as tubes/stubs close to the shell or pass partition plates within thermal exchange units. A standard water-box depth of X is furnished with custom depths available upon request. Capacity from 5/8” to 1-1/2” O.D. gage 16 to 38 (16 to 38 mm O.D. wall 0,5 to 1,6 mm) from tube sheet up to 2” (50 mm). Specifications Pulling force 15 T (150 kN) Pulling Stroke 6 “ (160 mm) Pulling speed 0,7”/sec (17 mm/sec) Dimension 3,38” x 36,61” (86 x 930 mm) Weight 32 Lbs (14,5 kg) Parameters TUBE OD INCH TUBE OD MM TUBE GAUGE 5/8 15.8 16-17 // 18-19 // 20-21 // 22-23 3/4 19.0 16-17 // 18-19 // 20-21 // 22-23 7/8 22.2 16-17 // 18-19 // 20-21 // 22-23 1.0 25.4 16-17 // 18-19 // 20-21 // 22-23 1-1/4 31.7 16-17 // 18-19 // 20-21 // 22-23 1-1/2 38.1 16-17 // 18-19 // 20-21 // 22-23 HYDRAULIC PUMP FOR TUBE PULLER Our Hydraulic Pumps have been designed to exacting standards to provide the maxi- mum productivity from a lightweight pump, specifically designed for tough tube pulling Applications. Standard features: – Two Speed Pump for High Performance – Light Weight and Portable – Safe Cage as Standard – 10 ft. Remote Pendant – 2-1/2 Gallon (9,5 liter) Metal Reservoir – Large Pressure Gauge Model & Specifications